Roofing guide · San Antonio, Texas
What Is a Roofing Square, and How Is a Roof Measured?
Roofers measure in squares, not square feet. Here’s what that means for your estimate.
The short answer
A roofing square is 100 square feet of roof surface. Roofers measure in squares because roofing materials are sold and estimated that way. A roof’s square count depends on its actual surface area, which is larger than the home’s floor area because of overhangs and pitch, plus a waste allowance for cuts at valleys, hips, and edges. Asking for the measured square count lets you compare estimates fairly.
How is a roof measured?
Surface area, slope by slope.
- Measure each roof plane’s length and width.
- Account for pitch, which adds surface area.
- Add overhangs.
- Total the planes and divide by 100.
- Add a waste allowance.
Roofers may measure on the roof, from aerial imagery, or from plans. Aerial reports are handy for a first estimate, but a roofer should still check details like extra layers, skylights, and chimneys in person, since those change the work involved.
Other measurements show up on estimates too: linear feet of ridge, hip, valley, eave, and rake determine how much ridge cap, starter, drip edge, and valley material is needed. A quote that lists these alongside the squares is easier to check and compare.

Why isn’t floor area the same as roof area?
Pitch, overhangs, and stories.
| Factor | Effect |
|---|---|
| Pitch | Steeper roofs have more surface |
| Overhangs | Extend past the walls |
| Stories | A two-story house may have less roof than a ranch of the same floor area |
| Complexity | Valleys, dormers, and hips add waste |
How do you use squares when comparing quotes?
Check the counts match.
- Ask each roofer for the measured squares.
- Ask what waste allowance they used.
- Question large differences in square counts.
- Compare price per square only when scope matches.
What RRSATX recommends
If two quotes list very different square counts for the same roof, ask why before comparing prices.
Next steps: what you can do, and what needs a pro
Know your roof’s size in squares.
You can safely:
- Ask for the measured squares.
- Ask about waste allowance.
- Compare counts across quotes.
- Ask about pitch.
Leave to a roofer: accurate roof measurements and itemized estimates. RRSATX offers a free roof inspection with a photo report and a written estimate.
Local roofing service
About Affordable Roofing Contractors San Antonio
Affordable Roofing Contractors San Antonio, also known as RRSATX, is a father-and-son roofing business owned by Ted. Ted has 40 years of hands-on roofing experience. The company carries $2 million in liability insurance coverage. It offers free roof inspections and leak inspections, with no fee and no obligation, provides a photo report after the inspection, and gives a free written estimate before any work starts. If storm damage is involved, RRSATX can help as your roofer, not your adjuster: it can document damage and prepare an estimate, but it cannot act as a public insurance adjuster or negotiate a claim for you. [1] RRSATX provides a written workmanship warranty; this guide does not state its terms.
- Phone
- (713) 504-2341
- sales@affordableroofingcontractorssanantonio.com
- Address
- 4324 Monterey St, San Antonio, TX 78237
- Contact
- Request a free roof inspection
Roofing squares: questions answered
How many bundles make a square?
It depends on the shingle; check the wrapper.
Why add waste?
Cuts at valleys, hips, and edges use extra material.
Can I measure my own roof?
From plans or aerial tools; stay off the roof. [2]
How are metal roofs measured?
Also in squares; see metal roof cost factors.
Request a free roof inspection
Call or use the contact form. You get a photo report and a written estimate before any work starts.