Shingle basics · San Antonio, Texas
Architectural Shingle Dimensions: Size, Exposure and Coverage Explained
Matching shingles for a repair, comparing roofing bids, or just curious how big an architectural shingle is? The honest answer is that there’s no single standard size. This guide compares published examples from Owens Corning, CertainTeed and IKO, explains the terms on a data sheet, and shows you how to find the size of the shingles already on your San Antonio roof.
The short answer
Architectural shingle dimensions vary by product, because each manufacturer publishes its own size. Architectural shingles are also called laminated or dimensional shingles. For example, Owens Corning lists TruDefinition Duration at 13¼ x 39⅜ inches, [1] CertainTeed lists Landmark at 13¼ x 38¾ inches, [2] and IKO lists Dynasty at 40⅞ x 13¾ inches, with length first. [3] Always check the product data sheet or the bundle wrapper for the exact shingle on your roof.
Architectural shingle dimensions by product: published examples compared
There is no single standard architectural shingle size. Each manufacturer sets the overall size, the exposure and the count per bundle for its own product line.
The table below uses figures straight from each manufacturer’s published specifications: the Owens Corning TruDefinition Duration data sheet, [1] the CertainTeed Landmark technical data sheet, [2] and the IKO Dynasty product specifications. [3] Note that IKO lists length first, so its size reads the other way around.

| Product | Overall size | Exposure | Shingles per bundle | Shingles per square | Coverage |
|---|---|---|---|---|---|
| Owens Corning TruDefinition Duration | 13¼” x 39⅜” [1] | 5⅝” [1] | Not less than 20 [1] | Average of 64 shingles per 3 bundles [1] | Average of 98.4 sq. ft. per 3 bundles [1] |
| CertainTeed Landmark | 13¼” x 38¾” [2] | 5⅝” [2] | Not listed; 3 bundles per square [2] | 65 [2] | Approximately 98.4 sq. ft. per square [2] |
| IKO Dynasty | 40⅞” x 13¾” (length x width) [3] | 5⅞” [3] | 20 [3] | 60 [3] | 33⅓ sq. ft. per bundle [3] |
Figures are as published by each manufacturer; see the Sources list below. Specifications change, so confirm with the current data sheet before ordering or matching shingles.
How architectural shingles differ from three-tab in shape
The difference you see from the street comes from layers, not just size. Architectural shingles are made from laminated layers, which gives the roof depth and shadow lines.
A three-tab shingle is a single flat layer with cutouts that create a regular, even pattern. An architectural shingle bonds layers together, so the exposed face has a thicker, layered profile with more depth and shadow. That layered build is why these styles aren’t interchangeable in a repair, even when the color looks close.

For the full comparison of looks, performance and cost factors, see our guides to three-tab shingles vs. architectural shingles and architectural asphalt shingles.
Overall size, exposure and coverage: what the terms on a data sheet mean
The overall size of a shingle and the part you actually see on the roof are different measurements. Knowing the terms makes any data sheet easy to read.
- Overall size. The full width and length of a single shingle as it comes out of the bundle.
- Exposure. The part of each shingle left showing once the next course is installed above it. The rest of the shingle, including the nailing area, is covered by the course above.
- Shingles per bundle. How many shingles come in each wrapped bundle.
- Bundles per square. How many bundles it takes to cover a roofing square.
- Coverage. The roof area a bundle or set of bundles covers when installed at the listed exposure.

A “square” is roofing shorthand for a fixed amount of roof area, and roofers price and order by it. Our guide to what a roofing square is explains how it works. CertainTeed’s data sheet, for example, lists shingle weight per 100 square feet. [2]
The published figures also show how exposure affects shingle count. IKO lists a 5⅞” exposure and 60 shingles per square, [3] while CertainTeed lists a 5⅝” exposure and 65 shingles per square. [2] A larger exposure means each shingle covers more roof, so fewer shingles are needed per square.
Why shingle dimensions matter for San Antonio repairs and estimates
Size and exposure decide whether new shingles line up with the old ones. They also affect how a roof is measured, ordered and priced.
- Storm and leak repairs. After hail or a wind storm, replacement shingles have to fit into existing courses. A shingle with a different size or exposure won’t line up, which can leave visible steps in the roof and gaps that let water in.
- Comparing bids. Roofers usually quote by the square. If bids list different square counts for the same house, ask how each roofer measured the roof and which shingle they plan to use.
- Ordering. Coverage per bundle tells the roofer how many bundles to order for the field of the roof, plus extra for cuts and waste.
- Accessories are separate products. Ridge caps and starter strips are their own products with their own sizes. See what ridge caps on a roof are and what a drip edge is for the edge and peak details.

To see how labor is figured by the square, read our guide to the labor cost to install shingles per square in San Antonio. RRSATX handles shingle matching through its roof repair service, and whole-roof estimates through roof replacement in San Antonio.
Nailing area and the manufacturer’s installation instructions
Where the nails go is set by the manufacturer, not by guesswork. Each product’s dimensions come with a defined nailing area and installation rules.
CertainTeed builds a NailTrak nailing feature into Landmark, and its data sheet states that detailed installation instructions are supplied on each bundle and must be followed. [2] Owens Corning describes SureNail Technology on TruDefinition Duration as a reinforced nailing strip with a wide nailing zone. [1]

At RRSATX, we install every shingle line to its own instructions. The exposure and the nail line work together: set the exposure wrong and the nails can end up where the next course doesn’t cover them, or outside the strip where the shingle is built to hold.
How to find your own shingle’s dimensions
The easiest way to learn your shingle’s size is to find its product name. Once you know the product, the manufacturer’s data sheet has the rest.
- Check for leftover bundles or wrappers. Some homeowners still have a partial bundle in the garage or shed from the original install. The wrapper usually names the manufacturer, product line and color.
- Look at your paperwork. Your roofing contract or invoice should list the shingle product. If you bought the house recently, check the documents from the sale.
- Look up the manufacturer’s data sheet. Search the product name on the manufacturer’s site and find the current data sheet, which lists size, exposure and coverage.
- Ask for an inspection instead of climbing up. Don’t go on the roof to measure shingles. A roofer can identify the product and check the roof’s condition at the same visit.
During an RRSATX roof inspection, ask us to identify your shingle product where possible. If you’re choosing a new shingle instead, our asphalt roofing page and our guide on how to choose asphalt shingles in San Antonio are good places to start.
Size, thickness and weight: what dimensions don’t tell you
A bigger shingle isn’t automatically a better shingle. Size alone doesn’t tell you a shingle’s quality.
Data sheets also list weight and other product details, and those, along with how the shingle is built and how well it’s installed, say more about how it will hold up on a San Antonio roof than its overall size does. When you compare products, read the whole data sheet, and ask your roofer why they recommend a particular shingle for your home.
Local roofing service
About Affordable Roofing Contractors San Antonio
Affordable Roofing Contractors San Antonio, also known as RRSATX, provides roof repair, roof replacement, roof inspections, and asphalt shingle roofing in San Antonio. When you call, tell us the shingle product name if you know it, or send a photo of a leftover bundle wrapper. Photos of the roof taken from the ground help too.
- Phone
- (713) 504-2341
- sales@affordableroofingcontractorssanantonio.com
- Address
- 4324 Monterey St, San Antonio, TX 78237
- Contact
- Request a free roof inspection
Architectural shingle dimensions: questions answered
What size is an architectural shingle?
It depends on the product. Owens Corning lists TruDefinition Duration at 13¼” x 39⅜”, [1] CertainTeed lists Landmark at 13¼” x 38¾”, [2] and IKO lists Dynasty at 40⅞” x 13¾”, length first. [3]
How much of each architectural shingle shows on the roof?
That’s the exposure, and it’s set by the manufacturer. Owens Corning and CertainTeed both list a 5⅝” exposure for these products, [1] [2] and IKO lists 5⅞” for Dynasty. [3]
How many bundles of architectural shingles cover a square?
Check the product. CertainTeed lists 3 bundles per square for Landmark. [2] Owens Corning lists an average coverage of 98.4 sq. ft. per 3 bundles, [1] and IKO lists 33⅓ sq. ft. per bundle for Dynasty. [3] Your roofer also orders extra for cuts and waste.
Can I mix shingle brands in a repair?
Sometimes, but it’s risky. If the replacement shingle has a different size or exposure, it won’t line up with the existing courses, and the color and profile may not match. The best match is the same product line, so find the product name first.
Is a bigger architectural shingle better?
Not necessarily. Size doesn’t tell you quality. Compare the full data sheet and the installation, not just the dimensions.
Are ridge caps the same size as regular shingles?
No. Ridge caps and starter strips are separate accessory products with their own dimensions. See what ridge caps on a roof are for how they’re used.
Explore the roofing topic
More help with shingles and roof measurements
Need your shingles identified or matched?
Ask RRSATX for a free roof inspection and written findings for your San Antonio roof.